Titan 2WD V8-5.6L (VK56) (2004)
Lateral Accelerometer: Service and Repair
G Sensor
G SENSOR
Removal and Installation
REMOVAL
1. Remove center console or center seat as required.
2. Remove yaw rate/side/decal G sensor attaching nuts as shown.
^
The location of the sensor it the same for all models.
CAUTION:
^
Do not use power tools to remove or install yaw rate/side/ decel G sensor.
^
Do not drop or strike the yaw rate/side/decal G sensor.
3. Disconnect harness connector and remove the yaw rate/side/decal G sensor
INSTALLATION
Installation is in the reverse order of removal