Titan 2WD V8-5.6L (VK56) (2004)
^
Apply liquid gasket to No.1 camshaft bracket as in illustration. Use Genuine RTV Silicone Sealant or equivalent.
CAUTION:
^
After installation, be sure to wipe off any excessive liquid gasket leaking from part "A" and "B" (both on right and left sides).
^
Remove completely any excess of liquid gasket inside bracket.
^
Apply liquid gasket to the back side of front cover as shown. Use Genuine RTV Silicone Sealant or equivalent.
^
Position No.1 camshaft bracket close to mounting position, and then install it to prevent from touching liquid gasket applied to each surface.