Titan 2WD V8-5.6L (VK56) (2004)
/Page-571002.png)
Removal and Installation
NOTE:
^
Left bank timing chain must be removed before right side,
^
The following procedure has only left side removal due to the right bank removal is the same as the left bank removal.
REMOVAL
1. Remove engine assembly from vehicle.
2. Remove the following components and related parts:
^
Drive belt auto tensioner and idler pulley.
^
Thermostat housing and water hose.
^
Power steering pump bracket.
^
Oil pan (lower) (upper) and oil strainer.
^
Ignition coil.
^
Rocket cover.
3. Remove chain case cover (right bank) and (left bank).
a. Loosen and remove bolts in the reverse order of shown in the figure.
b. Using tool, cut liquid gasket and remove covers.
Tool number: KV101 11100 (J-37228)
CAUTION: Use care not to damage mating surfaces.
