Titan 2WD V8-5.6L (VK56) (2004)
/Page-571006.png)
^
Push the plunger in tensioner body while pushing plunger head and squeezing return-proof clip with fingers 2. Secure it using stopper pin
3.
CAUTION: Plunger, spring, and spring seat pop out when (squeezing) return-proof clip without holding plunger head. It may cause serious
injuries. Always hold plunger head when removing.
11. Remove chain tension guide and slack guide.
12. Remove timing chain and crankshaft sprocket.
13. Using a suitable tool to assist, loosen bolts securing camshaft sprocket to remove camshaft sprocket.
CAUTION: To avoid interference between valves and pistons, do not turn crankshaft or camshaft when timing chain is disconnected.
14. Repeat the same procedure to remove the right timing chain and associated parts.
INSPECTION AFTER REMOVAL
Check for cracks and any excessive wear at link plates. Replace chain if necessary.
^
In the same way as for left bank, inspect timing chain and associated parts on right bank.
INSTALLATION
