Titan 2WD V8-5.6L (VK56) (2004)
b. Apply liquid gasket as shown in the figure. Use Genuine RTV Silicone Sealant or equivalent.
c. Check again that the timing mating mark on timing chain and that on each sprocket are aligned. Then, install front cover.
d. Install bolts in the numerical order shown in the figure.
e. After tightening, re-tighten to the specified torque.
CAUTION: Be sure to wipe off any excessive liquid gasket leaking onto surface mating with oil pan.
M6 x 50 mm (1.97 inch): No. 1, 20, 25, 26, 27
M6 x 80 mm (3.15 inch): No. 4, 5, 7
M6 x 20 mm (0.79 inch): Except the above
11. Install chain case cover (right bank) and (left bank) as follows:
a. Apply liquid gasket as shown in the figure. Use Genuine RTV Silicone Sealant or equivalent.