Titan 2WD V8-5.6L (VK56) (2004)
d. Tighten the bolts to the specified torque in numerical order as shown.
M6 x 30 mm (1.18 in): No.15,16
M8 x 25 mm (0.98in): No.1,3,5,7, 11,13
M8 x 45 mm (1.77 in): No.2,4,6,8, 10, 14
M8 x 123 mm (4.84in): No.9, 12
2. Install the oil strainer to the oil pan (upper).
3. Install the oil pan (lower).
a. Using a scraper to remove old liquid gasket from mating surfaces.
-
Also remove old liquid gasket from mating surface of oil pan (upper).
-
Remove old liquid gasket from bolt holes and thread.
CAUTION:
Do not scratch or damage the mating surfaces when cleaning off old liquid gasket.
b. Apply a continuous bead of liquid gasket using Tool as shown.
Tool number: WS39930000 ( - )
Use Genuine RTV Silicone Sealant or equivalent. Refer to Service Manual GI Section.
CAUTION:
Installation should be done within 5 minutes after applying liquid gasket.
c. Tighten the oil pan (lower) bolts to the specified torque in numerical order as shown.