Titan 2WD V8-5.6L (VK56) (2004)
Removal
1. Remove the instrument panel trim.
2. Remove the front heater and cooling unit assembly.
3. Remove the defroster nozzle.
4. Remove the RH and LH side demister ducts.
5. Remove the RH and LH ventilator ducts.
6. Remove the center ventilator duct.
Installation
Installation is in the reverse order of removal.
FLOOR DUCT
Removal
1. Remove the floor carpet.
2. Remove the two clips and remove the floor duct.
Installation
Installation is in the reverse order of removal.
GRILLES
Removal
1. Remove the interior trim panel as necessary.
2. Remove the ventilator grille from the interior trim panel.
Installation
Installation is in the reverse order of removal.