Titan 2WD V8-5.6L (VK56) (2004)
Cabin Air Filter: Service and Repair
Changing In-cabin Microfilter
1. Remove the glove box assembly.
a. Remove the two lower glove box screws.
b. Open the glove box, then remove the four upper glove box screws.
NOTE: It is not necessary to remove the two glove box striker screws.
c. Remove the glove box assembly from the instrument panel to access the in-cabin microfilter cover.
2. Remove the screw and remove the in-cabin microfilter cover
3. Remove the in-cabin microfilters from the front heater and cooling unit assembly housing.