Titan 2WD V8-5.6L (VK56) (2004)
Figure E-6
9. Position the Maxi Fuse, wires, and connector into the IPDM E/R box as shown in Figure E-6.
10. Reinstall the IPDM E/R cover and the relay / fuse cover.
11. Connect the negative battery cable.
12. Reprogram the radio presets and set the clock.
13. Go to Procedure F.
Procedure F - Confirm Fan Operation
1. Connect CONSULT-II to the vehicle.
2. Turn the ignition ON.
3. Select START (NISSAN BASED VHCL) > ENGINE > ACTIVE TEST > COOLING FAN
4. Use CONSULT-II to turn the condenser fan ON and then make sure the condenser fan is running.
5. Turn CONSULT-II OFF, turn the ignition OFF, and disconnect CONSULT-II from the vehicle.
Parts Information