Titan 2WD V8-5.6L (VK56) (2004)
CAUTION: Use care not to damage the seats and interior trim panels when removing the front heater and cooling unit assembly with it attached
to the steering member.
13. Remove the front heater and cooling unit assembly from the steering member.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
-
Replace the O-ring of the low-pressure pipe and high-pressure pipe with a new one, and apply compressor oil to it when installing it.
-
After charging the refrigerant, check for leaks.
NOTE:
Fill the engine cooling system with the specified coolant mixture.
Recharge the A/C system.