Titan 2WD V8-5.6L (VK56) (2004)
Hose/Line HVAC: Service and Repair
Removal and Installation For High-Pressure Flexible Hose
Removal and Installation for High-pressure Flexible Hose
REMOVAL
1. Remove the engine under cover using power tool.
2. Remove the engine air cleaner and air ducts.
3. Discharge the refrigerant. Refer to "HFC-134a (R-134a) Service Procedure" .
4. Remove the high-pressure flexible hose.
CAUTION: Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
-
Replace the O-ring of the high-pressure flexible hose with a new one, then apply compressor oil to it when installing it.
-
After charging refrigerant, check for leaks.