nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 14590 > < Diagram Information and Instructions|Page 14588
Page 1
background image

Compass: Description and Operation

COMPASS AND THERMOMETER 

System Description

The compass and thermometer are an integral part of the auto anti-dazzling inside mirror. This unit displays following items:

-

Earth magnetism and heading direction of vehicle.

-

Outside air temperature.

-

Caution for frozen road surfaces.

OUTSIDE TEMPERATURE DISPLAY

Push the switch when the ignition switch is in the ON position. The outside temperature will be displayed in "°F".

-

Selecting the indication range
Push the switch to change from "°F" to "°C".

-

The indicated temperature on the thermometer is not readily affected by engine heat. It changes only when one of the following conditions is
present.
-

The temperature detected by the ambient air temperature sensor is lower than the indicated temperature on the thermometer.

-

The vehicle speed is greater than 20 km/h (13 MPH).
(This is to prevent the indicated temperature from being affected by engine heat during low-speed driving.)

-

The ignition switch has been turned to the OFF position for more than 2 hours. (The engine is cold.)

DIRECTION DISPLAY

Push the switch when the ignition switch is in the ON position. The direction will be displayed.

Diagram Information and Instructions|Page 14590 > < Diagram Information and Instructions|Page 14588