Titan 2WD V8-5.6L (VK56) (2004)
/Page-2277002.png)
PARTS INFORMATION
CLAIMS INFORMATION
SERVICE PROCEDURE
^ Follow all cautions and warnings in the Service Manual when performing this procedure.
^ Wear suitable personal protective equipment (gloves, face shield, etc.) during this procedure.
^ Make sure the ignition switch is OFF before going to step 1, below.
^ Do NOT bend the Float Arm when handling the new Fuel Level Sending Unit.
1. Remove the Fuel Tank from the vehicle.
^ Refer to section FL of the Service Manual for removal information.
2. Remove the Fuel Pump Assembly from the Fuel Tank.
^ Refer to section FL of the Service Manual for removal information.
3. Remove the Fuel Level Sending Unit from the Fuel Pump Assembly as follows:
