Titan 2WD V8-5.6L (VK56) (2004)
Fog/Driving Lamp Bulb: Service and Repair
Bulb Replacement
1. Disconnect electrical connector.
2. Turn the bulb counterclockwise to remove it.
CAUTION:
-
Do not touch the glass of bulb directly by hand. Keep grease and other oily substances away from it. Do not touch bulb by hand while it is lit
or right after being turned off. Burning may result.
-
Do not leave bulb out of fog lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of fog lamp. When
replacing bulb, be sure to replace it with new one.