Titan 2WD V8-5.6L (VK56) (2004)
Combination Switch: Scan Tool Testing and Procedures
Combination Switch Reading Function
For details, refer to "COMBINATION SWITCH READING FUNCTION". See: Body and Frame/Body Control Systems/Body Control Module
CONSULT-II Function
CONSULT-II has a display function for work support, self-diagnosis, data monitor, and active test for each part by combining data receiving and sending
via the communication line from BCM.
CONSULT-II BASIC OPERATION
CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending
on control unit which carries out CAN communication.
1. With the ignition switch OFF, connect CONSULT-II and CONSULT-II CONVERTER to the data link connector, then turn ignition switch ON.
2. Touch "START (NISSAN BASED VHCL)".
3. Touch "BCM" on "SELECT SYSTEM" screen.
If "BCM" is not indicated, go to "CONSULT-II Data Link Connector (DLC) Circuit". See: Diagrams/Diagnostic Aids