Titan 2WD V8-5.6L (VK56) (2004)
Vanity Lamp: Service and Repair
VANITY MIRROR LAMP
Removal
The vanity mirror lamp is replaced as part of the sunvisor assembly.
Installation
Installation is in the reverse order of removal.
Bulb Replacement
1. Disconnect the negative battery cable.
2. Using a suitable tool (A), release the tabs and remove the vanity mirror lamp lens (1).
3. Release one side of the bulb (2) from the tab, then pull straight out to remove.
Vanity mirror lamp bulb: 12 V - 1.8 W
CAUTION: Wrap a cloth around tool to protect the housing and lens.