Titan 2WD V8-5.6L (VK56) (2004)
Fluid - Differential: Service and Repair
Changing Final Drive Oil
CAUTION: If using the vehicle for towing, the rear final drive oil must be replaced every 5,000 km (3,000 miles) or every three months, whichever
comes first.
1. Remove the filler plug.
2. Remove the drain plug and drain the final drive oil.
3. Apply sealant to the drain plug threads.
^
Use High Performance Thread Sealant or equivalent.
4. Install the drain plug and tighten to specification.
5. Refill the rear final drive with new specified oil.
Oil grade and viscosity: Refer to "Fluids and Lubricants".
Oil capacity. Refer to "Fluids and Lubricants".
6. Check the oil level.
NOTE: Rear final drive shown, front final drive similar
7. Install the filler plug and tighten to specification.