nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Electrical - Engine No Start/No Crank Condition|Page 11158 > < Campaign - Body Control Module Repl./Sub Harness Install|Page 11152
Page 1
background image

Wiring Harness: All Technical Service Bulletins
Electrical - Engine No Start/No Crank Condition

Classification:
EL04-031b

Reference:
TB04-131b

Date:
October 11, 2005

2004-2005 ARMADA AND TITAN;
ENGINE WILL NOT CRANK, AND/OR START, AND/OR
TRANSMISSION IMPROPER OPERATION

The Parts Information section has been amended for 2004 and 2005 MY vehicles.

No other sections have been changed. Please discard all previous copies of NTB04-131a.

APPLIED VEHICLES:
2004 - 2005 Armada (TA60)
2004 - 2005 Titan (A60)

IF YOU CONFIRM:

Any of the following:

^

The engine will not crank (starter will not operate).

^

The engine cranks but will not start.

^

Code U1000 and/or U1001 (CAN COMMUNICATION LINE) is stored in the ECM*.

* Multiple DTC's may also be stored (i.e. P0462, P1212, P1705, P16xx, P18xx, C11xx).

^

TCM, BCM and/or IPDM will not display on the CONSULT-II Systems screen.

^

The transmission doesn't function properly (i.e. harsh shift, slips, improper shift timing, etc.).

DETERMINE IF:

Connector F9 has water or corrosion.

NOTE:

If there is no water or corrosion in the connector, this bulletin does not apply. Go back to ASIST for further diagnostic and repair information.

ACTIONS:

Replace the entire Engine Control Harness and the A/T assembly Harness Connector.

IMPORTANT:

The purpose of "ACTIONS" (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service
Procedure as it contains information that is essential to successfully completing this repair.

Electrical - Engine No Start/No Crank Condition|Page 11158 > < Campaign - Body Control Module Repl./Sub Harness Install|Page 11152