Titan 2WD V8-5.6L (VK56) (2004)
44.
Harness should now be completely loose-remove it from the vehicle.
NOTE:
The vehicle you are working on may have a differential lock control unit (not shown) mounted near the sonar control unit.
45.
Install the new harness in reverse order. Make sure of the following:
^
All harness mounting clips are installed in the correct locations.
^
Seat, seat belt, and parking brake pedal bolts are tightened to correct torque:
IMPORTANT:
^
During installation of the new harness you will find some connectors taped to the harness as shown in the figure below.
^
Some of the connectors will be for options that the vehicle you are working on does not have.