Titan 2WD V8-5.6L (VK56) (2004)
2.
Press [SUB MODE] (see Figure C) then:
a.
From the listed items, find and select [BATTERY CHARGE].
3.
Check the CONSULT-II's "Charger Input" reading (see Figure D).
NOTE:
^
"Battery Voltage" is the voltage level of CONSULT-II's battery.
^
"Charger Input" is the voltage level of the vehicle's battery. (It must be above 12 volts.)
Step Three: Reprogram the ECM
Step Four: "Wrap-up" After Reprogramming is Finished
1.
Turn the ignition switch "OFF" and CONSULT-II "OFF".
2.
Wait more than 10 seconds, then;
a.
Turn the ignition switch "ON" for 2 second, then