Titan 2WD V8-5.6L (VK56) (2004)
7. Manually turn crankshaft pulley a few turns.
8. Make sure valve clearances for cold engine are within specifications by referring to the specified values.
9. After completing the repair, check valve clearances again with the specifications for warmed engine. Make sure the values are within
specifications.
Valve clearance standard:
Hot
Intake: 0.304 - 0.416 mm (0.012 - 0.016 inch)
Exhaust: 0.308 - 0.432 mm (0.012 - 0.017 inch)
Colds
Intake: 0.26 - 0.34 mm (0.010 - 0.013 inch)
Exhaust: 0.29 - 0.37 mm (0.011 - 0.015 inch)