Titan 2WD V8-5.6L (VK56) (2004)
4. Touch "RECORD" while monitoring to record the status of the item being monitored. To stop recording, touch "STOP".
NOTE:
The details for the display of the CAN status are as follows:
-
0: Normal
-
1 - 40: Error detected in the past and stored in IPDM E/R memory.
ACTIVE TEST
Operation Procedure
1. Touch "ACTIVE TEST" on "SELECT DIAG-MODE" screen.
2. Touch item to be tested, and check operation.
3. Touch "START".
4. Touch "STOP" while testing to stop the operation.