Titan 2WD V8-5.6L (VK56) (2004)
8.
Connect the fuse end of the BCM Sub-Harness to the BCM as shown in Figure 7.
^
Make sure the connectors are securely connected ("snapped" in place) to the BCM.
9.
At
the other end of the BCM Sub-Harness:
^
Connect the White Connector to the vehicle-side harness white connector (see Figure 8a).
^
Then connect the Black Connector to the vehicle-side harness black connector (see Figure 8b).
^
Make sure the connectors are securely connected ("snapped" in place).