Titan 2WD V8-5.6L (VK56) (2004)
PARTS INFORMATION
CLAIMS INFORMATION
SERVICE PROCEDURE
1.
Write down the radio station pre-sets.
2.
Shift the gear selector to the 1st gear position.
^
Make sure the parking brake is applied.
3.
Disconnect both the negative and positive battery cables, negative cable first. Then wait at least 3 minutes.
4.
Pull the center dash "Switch Assembly" (face unit) loose from the dash (see Figure 2).
^
There are 4 clips, one at each corner.
^
Pull the switch assembly "straight-out" at the top and the bottom.