Titan 2WD V8-5.6L (VK56) (2004)
Refrigerant Pressure Sensor / Switch: Service and Repair
Removal and Installation for Refrigerant Pressure Sensor
REMOVAL
1. Disconnect the refrigerant pressure sensor electrical connector.
2. Remove the refrigerant pressure sensor from the condenser.
CAUTION: Be careful not to damage the condenser fins.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
-
Be careful not to damage the condenser fins.
-
Apply compressor oil to the O-ring of the refrigerant pressure sensor when installing it.