Titan 2WD V8-5.6L (VK56) (2004)
1.
With CONSULT-II "ON", print the Freeze Frame data as shown. Figure 1 is an example of the F.F. Data printout.
2.
Attach this printout to the Repair Order.
^
The Freeze Frame data that you've printed contains the ECM Part Number (P/N).
^
The ECM part number will be used to see if this bulletin applies or not.
3.
Check the ECM Part Number on the printout from Step 1 (Figure 1);
^
Compare your vehicle's ECM P/N to those shown under Current ECM P/N in Chart A, shown.
^
If it's in that column, this bulletin applies.
A.
If your vehicle's ECM P/N matches a P/N in the chart:
^
Perform ECM Reprogramming, then
^
Perform A/F Sensor Test.
B.
If your vehicle's ECM P/N does not match a P/N in the chart:
^
This bulletin does not apply. Refer to ASIST for further diagnostic and repair information.
Step B: ECM REPROGRAMMING
Vehicle ECM Reprogramming Overview
^
There are four basic steps
1.
Download reprogramming data (transfer it) from ASIST into CONSULT-II.
2.
"Preparation" steps before reprogramming.