Titan 2WD V8-5.6L (VK56) (2004)
14. Remove pinch bolt from steering knuckle using power tool. Then remove steering knuckle from lower link ball joint.
INSPECTION AFTER REMOVAL
Check for deformity, cracks and damage on each part, replace if necessary.
^
Perform ball joint inspection.
INSTALLATION
Installation is in the reverse order of removal.
^
Refer to "Components" for tightening torques.
^
When installing disc rotor on wheel hub and bearing assembly, align the marks. (When not using the alignment mark, refer to "DISC ROTOR
INSPECTION".)
^
When installing wheel and tire, refer to "Rotation".