Titan 2WD V8-5.6L (VK56) (2004)
Ball Joint: Service and Repair
UPPER BALL JOINT AND LOWER BALL JOINT
Removal and Installation
The ball joints are part of the upper and lower links.
Inspection
^
Check the ball joint for excessive play. Replace the upper or lower link assembly if any of the following exists:
^
Ball joint stud is worn.
^
Ball joint is hard to swing.
^
Ball joint play in axial directions or end play is excessive.
SWINGING FORCE
NOTE: Before checking the axial forces and end play, turn the lower ball joint at least 10 revolutions so that the ball joint is properly broken in.
1. Measure the ball joint swinging force using a suitable tool.
^
Measure at the cotter pin hole for upper ball joint as shown.
^
Measure at the groove for lower ball joint as shown.