Titan 2WD V8-5.6L (VK56) (2004)
The "To" number will read: 31020-XXXXX.
3.
Click on the "Add" button.
^
This will add the data you selected to the "File(s) Selected" list.
4.
Write the "To" number on the Repair Order.
5.
Click on "Continue" and follow directions to perform "data transfer" (download) from ASIST into CONSULT-II.
Step Two: Preparation Steps Before Reprogramming TCM
1.
Connect a battery charger to the vehicle's battery. Set the charger to a low charge rate (trickle charge).
CAUTION:
For number 2 below and number 3, DO NOT connect the CONSULT-II A/C Power Supply.
2.
Press [SUB MODE] (see Figure C) then:
a.
From the listed items, find and select [BATTERY CHARGE].