Titan 2WD V8-5.6L (VK56) (2004)
/Page-1383001.png)
Differential Carrier: Service and Repair
CARRIER COVER
REMOVAL
1. Drain gear oil.
2. Remove carrier cover.
^
Disconnect the parking brake cable from the carrier cover
^
Disconnect the hydraulic brake tube from the carrier cover
INSTALLATION
1. Install new carrier Apply liquid sealant to carrier cover side and install axle housing.
2. Tighten carrier cover bolts.
Carrier cover bolts: 42 Nm (4.3 kgf-cm, 31 ft. lbs.)
3. Fill final drive with recommended gear oil.