Titan 2WD V8-5.6L (VK56) (2004)
4. Remove snap ring from A/T assembly harness connector.
5. Push A/T assembly harness connector.
CAUTION: Be careful not to damage connector.
6. Remove oil pan and oil pan gasket.
7. Check foreign materials in oil pan to help determine causes of malfunction. If the A/T fluid is very dark, smells burned, or contains foreign
particles, frictional material (clutches, band) may need replacement. A tacky film that will not wipe clean indicates varnish build up. Varnish can
cause valves, servo, and clutches to stick and can inhibit pump pressure.
^
If frictional material is detected, perform A/T fluid cooler cleaning. Refer to A/T Fluid Cooler Cleaning.