Titan 2WD V8-5.6L (VK56) (2004)
7. Remove the mounting bolts, and remove the regulator and guide channel from the panel.
8. Disconnect the connector for the regulator assembly.
9. Remove the partition glass from the panel.
INSTALLATION
1. Install the partition glass in the panel.
2. Install the partition sash.
3. Connect the harness connector to the regulator assembly and install the regulator and guide channel.
4. Install the glass from outside to ensure that it is in both the front and rear glass channels.
Tighten glass mounting bolts to the specified torque.
Glass mounting bolts : 6.1 Nm (0.62 kg-m, 54 in-lb)
5. Install the inside seal.
6. Install the rear door finisher.