Titan 2WD V8-5.6L (VK56) (2004)
Submit a Primary Failed Part (PP) line claim using the claims coding shown.
SERVICE PROCEDURE
1.
Remove the front door panel, as described/shown in the Service Manual Section EI.
2.
Remove the front glass assembly, as described/shown in the Service Manual Section GW. (Figure 1)
3.
Remove the glass run rubber assembly from the door (Figure 1).
^
Replace it with the glass run rubber assembly from the Parts Information section of this bulletin.
^
Make sure the glass run rubber assembly is installed correctly into the metal channels.
4.
Re-install the door glass assembly.