Titan 2WD V8-5.6L (VK56DE) (2006)
/Page-615002.png)
Image Symbols
NOTE:
^
To remove timing chain and associated parts, start with those on the LH bank. The procedure for removing parts on the RH bank is omitted
because it is the same as that for removal on the LH bank.
^
To install timing chain and associated parts, start with those on the RH bank. The procedure for installing parts on the LH bank is omitted because
it is the same as that for installation on the RH bank.
REMOVAL
1. Remove the engine assembly from the vehicle.
2. Remove the following components and related parts:
^
Drive belt auto tensioner and idler pulley.
^
Thermostat housing and water hose.
^
Power steering oil pump bracket.
^
Oil pan (lower), (upper) and oil strainer.
^
Ignition coil.
^
Rocker cover.
3. Remove the chain case cover RH bank (A) and chain case cover LH bank (B) as follows:
a. Loosen and remove the bolts as shown.
b. Cut the liquid gasket and remove the covers using Tool.
Tool number: KV10111100 (J-37228)
CAUTION: Do not damage mating surfaces.
