Titan 2WD V8-5.6L (VK56DE) (2006)
^
D: Intake
NOTE: Firing order 1-8-7-3-6-5-4-2
^
No. 1 cylinder compression TDC
^
Measure valve clearance using suitable tool.
CAUTION: If the inspection was carried out with a cold engine, make sure the values with a fully warmed up engine are still within
specifications.
9. Turn the crankshaft pulley clockwise 270° from the position of No. 1 cylinder compression TDC to obtain No. 3 cylinder compression TDC.
10. Measure valve clearances at the locations marked "X" as shown in the table (locations indicated with white arrow).
^
<- : Engine front
^
<- (black): Measurable at No.1 cylinder compression top dead center
^
<- (white): Measurable at No. 3 cylinder compression top dead center
^
A: RH
^
B: LH
^
C: Exhaust
^
D: Intake
NOTE: Firing order 1-8-7-2-3-6-5-4-2
^
No. 3 cylinder compression TDC