Titan 2WD V8-5.6L (VK56DE) (2006)
1. Install A/T fluid temperature sensor 2 to bracket.
2. Install A/T fluid temperature sensor 2 (with bracket) in control valve with TCM. Tighten A/T fluid temperature sensor 2 bolt to the specified
torque. Refer to "Components". See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and Repair/Overhaul (Component
Parts)/Components
CAUTION: Adjust bolt hole of bracket to bolt hole of control valve with TCM.
3. Connect A/T fluid temperature sensor 2 connector.
4. Securely fasten A/T temperature sensor 2 harness with terminal clip.
5. Install oil pan to transmission case.
6. Connect the negative battery terminal
CAUTION: After completing installation, check for A/T fluid leakage and fluid level.