Titan 2WD V8-5.6L (VK56DE) (2006)
Model 2F1310
REMOVAL
1. Put matching marks on the front propeller shaft flange yoke and the companion flange of the front final drive as shown.
CAUTION: For matching marks, use paint. Never damage the flange yoke and companion flange of the front final drive.
2. Remove the bolts and then remove the front propeller shaft from the front final drive and transfer.
INSPECTION AFTER REMOVAL
^
Inspect the propeller shaft tube runout. If run out exceeds the limit, replace the propeller shaft assembly
Propeller shaft runout limit: 0.6 mm (0.024 inch) or less