Titan 2WD V8-5.6L (VK56DE) Flex Fuel (2009)
Parking Assist Control Module: Service and Repair
SONAR CONTROL UNIT
Removal and Installation
REMOVAL
1. Remove the rear panel. Refer to See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair.
2. For king cab models only, pull up the carpet to gain access to the sonar control unit.
-
Sonar control unit (king cab) (1)
-
Sonar control unit (crew cab) (2)
3. Disconnect the sonar control unit connector.
4. Remove the two bolts and remove the sonar control unit.
INSTALLATION
Installation is in the reverse order of removal.