Titan 2WD V8-5.6L (VK56DE) Flex Fuel (2009)
Console: Removal and Replacement
A/T Finisher
A/T FINISHER
Removal and Installation
REMOVAL
1. Remove the shift knob (1).
2. Remove the storage compartment mask (3) and console upper finisher (4).
3. Pull up on A/T finisher (2) to release clips, then tilt aside.
4. Disconnect A/T finisher electrical connectors and remove from front center console assembly.
INSTALLATION
Installation is in the reverse order of removal.
Center Console
CENTER CONSOLE
Removal and Installation
REMOVAL
1. Disconnect the battery negative terminal.