Titan 2WD V8-5.6L (VK56DE) Flex Fuel (2009)
Brake Pad: Removal and Replacement
Exploded View
FRONT DISC BRAKE
Exploded View of Brake Pads
Removal And Installation
FRONT DISC BRAKE
Removal and Installation of Brake Pads
WARNING:
Clean dust on caliper and brake pad with a vacuum dust collector to minimize the hazard of air borne particles or other materials.
CAUTION:
-
While removing cylinder body, do not depress brake pedal because piston will pop out.
-
It is not necessary to remove bolts on torque member and brake hose except for disassembly or replacement of caliper assembly. In this
case, hang cylinder body with a wire so as not to stretch brake hose.
-
Do not damage piston boot.
-
If any shim is subject to serious corrosion, replace it with a new one.
-
Always replace shim and shim cover as a set when replacing brake pads.
-
Keep rotor free from brake fluid.
-
Burnish the brake pads and disc rotor mutually contacting surfaces, after refinishing or replacing rotors, after replacing pads, or if a soft
pedal occurs at very low mileage.
REMOVAL
1. Remove front wheel and tires using power tool.
2. Remove lower sliding pin bolt.