Titan 2WD V8-5.6L (VK56DE) Flex Fuel (2009)
Brake Master Cylinder: Overhaul
With ABS
BRAKE MASTER CYLINDER
With ABS
DISASSEMBLY
CAUTION:
-
Master cylinder assembly cannot be disassembled.
-
Do not drop parts. If a part is dropped, do not use it.
1. Pull reservoir tank off the master cylinder assembly.
2. Remove grommets from master cylinder assembly and discard the grommets.
CAUTION:
Discard the grommets, do not reuse.
3. Remove the fluid level sensor from the reservoir tank.
ASSEMBLY
CAUTION:
-
Never use mineral oil such as kerosene or gasoline during the cleaning and assembly process.
-
Do not drop parts. If a part is dropped, do not use it.
1. Apply brake fluid or rubber grease to the new grommets, then insert the new grommets into the master cylinder assembly.
CAUTION:
Do not reuse the grommets.
2. Install reservoir tank onto the master cylinder assembly.
3. Install the fluid level sensor on the reservoir tank.
With ABLS/VDC/TCS