Titan 2WD V8-5.6L (VK56DE) Flex Fuel (2009)
Variable Valve Timing Actuator: Service and Repair
Intake Valve Timing Control Solenoid Valve (LH)
INTAKE VALVE TIMING CONTROL
Intake Valve Timing Control Solenoid Valve (LH)
REMOVAL
1. Remove engine room cover using power tool. Refer to See: Service and Repair/Removal and Replacement/Engine Cover.
2. Remove air duct and resonator assembly. Refer to See: Tune-up and Engine Performance Checks/Air Cleaner Housing/Service and
Repair/Removal and Installation.
3. Remove drive belt. Refer to See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair.
4. Disconnect Intake valve timing control intake valve timing control solenoid valve connector (LH).
5. Remove Intake valve timing control solenoid valve (LH) (2) from Intake valve timing control solenoid valve cover (LH) (1).
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Replace the O-ring (3) of the Intake valve timing control solenoid valve with a new one, then lubricate O-ring with engine oil before
installing.
Intake valve timing control solenoid valve bolt : 9.6 N.m (0.98 kg-m, 85 in-lb)