Titan 2WD V8-5.6L (VK56DE) Flex Fuel (2009)
-
No. 3 cylinder compression TDC
-
Measure valve clearance using suitable tool. Refer to See: Engine Lubrication/Specifications.
CAUTION:
If the inspection was carried out with a cold engine, make sure the values with a fully warmed up engine are still within specifications.
10. Turn the crankshaft pulley clockwise 90° from the position of No.
3 cylinder compression TDC (clockwise by 360° from the position of No. 1 cylinder compression TDC) to measure the intake and exhaust valve
clearances of No. 6 cylinder (G) and the exhaust valve clearance of No. 2 cylinder (E).
-
Arrow indicates Engine front
-
A: RH
-
B: LH
-
C: Exhaust
-
D: Intake
-
E: No. 2 cylinder
-
F: No. 4 cylinder