Titan 2WD V8-5.6L (VK56DE) Flex Fuel (2009)
Valve Guide Seal: Service and Repair
OIL SEAL
Removal and Installation of Valve Oil Seal
REMOVAL
1. Remove the camshaft relating to the valve oil seal to be removed. Refer to See: Camshaft, Lifters and Push Rods/Camshaft/Service and
Repair/Removal And Installation.
2. Remove the valve lifters. Refer to See: Cylinder Head Assembly/Service and Repair/Overhaul/Exploded View.
-
Correctly identify the location where each part is removed from. Keep parts organized to avoid mixing them up.
3. Turn the crankshaft until the cylinder requiring new oil seals is at TDC. This will prevent the valve from dropping into the cylinder.
4. Remove the valve collet using Tool.
CAUTION:
Do not damage the valve lifter holes.
5. Remove the valve spring retainer and valve spring.
CAUTION:
Do not remove the valve spring seat from the valve spring.
6. Remove the valve oil seal using Tool.
Tool number : KV10107902 (J-38959)
INSTALLATION
Installation is in the reverse order of removal.