Titan 2WD V8-5.6L (VK56DE) Flex Fuel (2009)
Exploded View
Removal and Installation
REMOVAL
1. Remove the upper oil pan. Refer to the updated Oil Pan and Oil Strainer procedure above.
2. Remove variable timing control solenoids.
3. Remove intake valve timing control sensors.
4. Remove the crankshaft driven fan pulley and pulley bracket.
5. Remove the drive belt auto tensioner and idler pulley.
6. Remove the intake valve timing control solenoid valve cover (RH) (A) and intake valve timing control solenoid valve cover (LH) (B) as follows:
a. Loosen and remove the bolts in the reverse of order as shown.
b. Cut the liquid gasket and remove the covers using Tool.
Tool number: KVIOIIIIOO (J-37228)
CAUTION:
Do not damage mating surfaces.
7. Obtain compression TDC of No.1 cylinder as follows:
a. Turn the crankshaft pulley clockwise to align the TDC identification notch (without paint mark) with the timing indicator on the front cover.