Titan 2WD V8-5.6L (VK56DE) Flex Fuel (2009)
12. Remove chain tensioner cover using Tool (if necessary).
Tool number: KVIOIIIIOO (J-37228)
INSTALLATION
1. Install the front oil seal using suitable tool.
CAUTION:
Do not scratch or make burrs on the circumference of the oil seal.
2. Install the chain tensioner cover (if removed).
-
Apply liquid gasket as shown.
Use Genuine RTV Silicone Sealant or equivalent.
3. Install the front cover as follows:
a. Install a new O-ring on the cylinder block.
b. Apply liquid gasket as shown.
Use Genuine RTV Silicone Sealant or equivalent.