Titan 2WD V8-5.6L (VK56DE) Flex Fuel (2009)
-
No. 1 cylinder compression TDC
-
Measure valve clearance using suitable tool. Refer to See: Engine Lubrication/Specifications.
CAUTION:
If the inspection was carried out with a cold engine, make sure the values with a fully warmed up engine are still within specifications.
8. Turn the crankshaft pulley clockwise 270° from the position of No. 1 cylinder compression TDC to obtain No. 3 cylinder compression TDC.
9. Measure valve clearances at the locations marked "X" as shown in the table below (locations indicated with white arrow).
NOTE:
Firing order 1-8-7-3-6-5-4-2