Titan 2WD V8-5.6L (VK56DE) Flex Fuel (2009)
adapter.
Tool number : KV99233130 (J-29884)
CAUTION:
To prevent deformation of the pulley groove, the puller claws should be hooked under the pulley groove and not into the pulley groove.
6. Remove the magnet coil harness clip using a screwdriver, remove the three magnet coil fixing screws and remove the magnet coil.
INSPECTION
Clutch Disc
If the contact surface shows signs of damage due to excessive heat, replace clutch disc and pulley.
Pulley
Check the appearance of the pulley assembly. If contact surface of pulley shows signs of excessive grooving, replace clutch disc and pulley. The
contact surfaces of the pulley assembly should be cleaned with a suitable solvent before reinstallation.
Coil
Check magnet coil for loose connections or any cracked insulation.
INSTALLATION
1. Install the magnet coil.