Titan 2WD V8-5.6L (VK56DE) Flex Fuel (2009)
Control Module HVAC: Service and Repair
CONTROL UNIT
Removal and Installation
REMOVAL
1. Remove the control knobs from the front air control unit.
2. Remove the cluster lid D. Refer to See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and
Replacement/Cluster LID D/Removal And Installation.
3. Remove the four screws (A) securing the front air control unit (1) to cluster lid D (2).
4. Remove the front air control unit (1).
INSTALLATION
Installation is in the reverse order of removal.