Titan 2WD V8-5.6L (VK56DE) Flex Fuel (2009)
Cabin Temperature Sensor / Switch: Service and Repair
Intake Sensor
INTAKE SENSOR
Removal and Installation
REMOVAL
1. Remove the instrument panel. Refer to See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal
and Replacement/Instrument Panel Assembly/Removal And Installation.
2. Disconnect the intake sensor electrical connector.
NOTE:
The intake sensor is located on the top of the heater and cooling unit assembly next to the A/C evaporator cover.
3. Twist the intake sensor to remove the intake sensor from the heater and cooling unit assembly.
INSTALLATION
Installation is in the reverse order of removal.